Procedure for Blowdown of Boiler Guage Glass

byManoj
5
> Close water cock and steam cock of gauge glass and open the drain
> Open the steam cock a strong jet of steam should be seen from the drain after that close the steam cock
> Open the water cock a strong jet of water should be seen from the drain after that close the water cock and drain
> Open the water cock water will rise in the gauge above normal level
> Then open the steam cock the water should then settle down to give the correct level of boiler water

5 Comments


>> Your Comments are always appreciated...
>> Discussion is an exchange of knowledge It Make the Mariner Perfect.... Please Discuss below...

  1. Unknown25 March 2014 at 02:44

    please clarify my doubt.... why two gauge glasses are given in boiler??

    ReplyDelete
    Replies
    1. nithin25 March 2014 at 08:55

      during rough weather or ship heels at an angle it will be very difficult to find the correct readings. If two gauge glasses are there the we an find out it easily

      Delete
    2. Unknown10 July 2014 at 02:56

      during rough weather, both gauge glass will not show correct reading. dude, its solas requirement to install 2 gauge glass as an alternative option.

      Delete
  2. Fuzail faisal19 December 2018 at 22:09

    Pretty good post. I just stumbled upon your blog and wanted to say that I have really enjoyed reading your blog posts. Any way I'll be subscribing to your feed and I hope you post again soon. Big thanks for the useful info. empty liquor bottle manufacturer

    ReplyDelete
  3. YK Agency11 January 2019 at 01:57

    Great articles and great layout. Your blog post deserves all of the positive feedback it’s been getting. Glass machine manufacturer

    ReplyDelete
Previous Post Next Post