What Is Power Factor And Its Significant

Understanding Power Factor
           In order to understand this term, I am going to draw a parallel between a mechanical system and an electrical system.  When we plan to buy a new car considering the time we spend in traffic jams – one of the basic parameters we look at is the efficiency of the system.  If the manufacturer promises that the car will deliver a mileage of 18 km/Lit and we actually land up getting 15 km/ lit
we can say that the cars mileage is about 83%. This is a good method of determining how the cars combustion system operates.

>Power factor is measure of how efficiently an A.C. electrical system operates.

>Power in terms of variables is the product of VOLTAGE and CURRENT.
                          i.e P=VxI

http://upload.wikimedia.org/wikipedia/commons/thumb/b/b9/Power_factor_0.7.svg/2000px-Power_factor_0.7.svg.png

Voltage and current are rarely in phase. They are in phase only in ideal conditions

ϕ is the angle between Voltage and Current.

Cos ϕ is the power factor of electrical load.

Onboard ships this value is normally 0.8 lagging.
This means that the current waveform lags the voltage waveform by about 37 degrees.
Example
Let us consider the following situation: When we switch on a breaker, for eg ballast pump,
Power from the Main switch board ( P= VxI KW) is supplied to the motor.
This is called the Actual power (KW).  Actual power does useful work and overcomes normal line losses.

Reactive power (KVAR) is the volt-amperes necessary to provide MAGNETIZING POWER for INDUCTIVE LOADS.

Apparent power (KVA) is the sum of the total power required to run the motor & the reactive power.


Significance: A high power factor is an indication that the apparent power requirements (KVA) is very close to the actual power requirement (KW).
This means that if the power factor is 0.9
And we supply 100 KW to the motor 90 KW is used effectively to turn the rotor and only 10 KW is lost on inductive loads and losses.  Having a high power factor is of great benefit to the consumer as well as the producer.




About the Author 
Mr.Joel Andrew Pinto is a shrewd and expert sailor, presently working with Anglo Eastern.He exhibits keen interest in innovative technologies as well as in compiling maritime notes. Catch him on Facebook.

3 Comments


>> Your Comments are always appreciated...
>> Discussion is an exchange of knowledge It Make the Mariner Perfect.... Please Discuss below...

  1. Thakz joel.... Explained nicely....

    ReplyDelete
  2. Very sorry but it's wrong explanation. Pls stick to basic marine engineering and let these electrical concepts be better answered by good authors who has better concepts and done good amount of hard work.Best of luck

    ReplyDelete
    Replies
    1. if it is wrong then please come up with correct information if u really mean to do something good or are u here just to criticise?

      Delete
Previous Post Next Post